Defender Security 812BF Specifikace Strana 21

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 78
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 20
SERVICE INSTRUCTIONS
20
WARNING
Always immobilise the machine by stopping the engine, removing the ignition
key and disconnecting the battery before undertaking any maintenance work.
!
!
SERVICE SCHEDULE
Check water.
Check radiator is clear.
Check engine oil - top up if necessary (10W-30).
Check for engine oil / hydraulic oil leaks.
Check fuel level.
Check feed funnel, feed roller cover, access covers,
engine covers and discharge unit are securely fitted.
Check blades.
Clean air filter element.
Check tyre pressure is 2.9 Bar (42 psi).
Check safety bar mechanism.
Check for tightness all nuts, bolts and fastenings
making sure nothing has worked loose.
Grease discharge flange.
Check tension of main drive belts
(and tension if necessary).
Grease the roller box slides.
Grease the roller spline and bearing.
Check fuel pipes and clamp bands.
Check battery electrolyte level.
Check for loose electrical wiring.
Grease jack stand.
Replace track drive unit oil. 
Replace hydraulic oil filter - every year or 100 hours
after service or repair work to the hydraulic system. 
Replace hydraulic oil. 
Replace fuel pipes and clamp bands.
Check coolant.
Change engine oil.
Replace engine oil filter cartridge.
Check valve clearance.
Replace anvils.
Axle maintenance.
Tow head maintenance.
Grease tandem pump spline drive.
Daily
Check
50
Hours
100
Hours
500
Hours
1
Year
REFER TO YOUR ENGINE
SUPPLIERS MANUAL
DEPENDING ON WORKING ENVIRONMENT
RETURN TO DEALER - 1500 HRS OR 3 YRS
REFER TO SUPPLIERS
INSTRUCTION SHEET
NOTE: Your Timberwolf woodchipper is covered by a full 12 months parts and labour warranty.
Subject to correct maintenance and proper machine usage, the bearings are guaranteed for 12
months regardless of hours worked by the machine. In conditions of 'heavy usage' - i.e. in excess of
500 hours per year - it is recommended that the bearings are changed annually to ensure that the
machine retains optimum working performance.
OR
OR
OR AS REQUIRED - SEE PAGE 26
OR AS REQUIRED - SEE PAGE 26
Red text = Tracked models only Blue text = Road tow models only
OR
(1ST TIME)
THEN
&
Zobrazit stránku 20
1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 77 78

Komentáře k této Příručce

Žádné komentáře